ROLLERS AND PULLEYS

ROLLERS, 17.5 IN X 3.75 IN FINISHED OD WITH TUNGSTUEN/CARBIDE FLAME SPRAYED FINISH ONE END STRAIGHT BORE FINISH .475 IN TO FIT FENNER MAHEIM TRANSTORQ BRUSHING THE OTHER STAND TAPERED BUSHING

ROLLERS 17.5 IN L X 3.75 IN FINISHED OD, ONE END STRAIGHT BORE FINISH .475 IN TO FIT FENNER MANHEIM TRANSTORQ BUSHING, OTHER END STD TAPERD BUSHING FOR QD-SH .5 FROM END

STAINLESS STEEL TAIL PULLEY WITH ARBITRARY JOURNAL DIAMETER AND PROJECTION FOR QUOTATION PURPOSES. DRAWING TO BE APPROVED ON ORDER._x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x00

STAINLESS STEEL DRIVE PUELLEY WITH ARBITARY JOURNAL DIAMETER AND PROJECTION FOR QUOTATION PURPOSES. DRAWING TO BE APPROVED ON ORDER

ROLLERS RECOVER 10.25 IN FACE WIDTH X 3.38 IN SHELL DIAMETER, V-GROOVE, ROUND BORE

UHMW TAIL PULLEY 8 IN DIAMETER 18 IN WIDE WITH GROOVES FOR 2 IN PITCH DUAL DRIVE BELT_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x

ROLLERS AND PULLEYS CARBON STEEL 14.10 IN FACE WIDTH X 1.9 IN SHELL DIAMETER HEX SHAFT 0.4375 IN

6 IN SD TAIL PULLEY WITH 1.5 IN SQ BORE _x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005

ROLLERS AND PULLEYS CARBON STEEL 34 IN FACE WIDTH X 5.5 IN SHELL DIAMETER CROWNED, LAGGING, ROUND BORE

6 IN SD DRIVE PULLEY WITH 1.5 IN SQUARE BORE _x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F_x005F